Quadro Evo ventilation units
The Vort Quadro Evo series consists of 23 fan units with 5 operating modes and 3 power levels 35/60/100 m³/h that can be mounted in 10 different housings (surface, flush, fire protection).
The inserts consist of: Spiral casing, motor, impeller, filter, filter frame control board and front panel.
- Ball bearing energy saving motor designed for at least 40,000 hours of operation at maximum operating temperature
- Fan insert and front panel made of white self-lubricating ABS plastic
- Pre-circulating impeller made of PBT plastic
- Quiet operation with sufficient pressure reserve at nominal flow rate
- Incl. washable filter class ISO Coarse >30 % incl. filter cleaning indicator
- Tool-free filter change
- Ingress protection IP 45, can be used in area 1 according to VDE 0100-701
- continuous basic ventilation for moisture protection possible
Modes of operation:
Base version:
- Operation when switching on the room lighting or via separate button/switch
Tail T version:
- Triggering when switching on the room lighting or üvia separate pushbutton/switch
- With switch-on delay of 0-45 seconds and overrun adjustable from 0-20 minutes
Overshoot Per TP version:
- Triggering when switching on the room lighting or via separate pushbutton/switch
- With switch-on delay 0, 45, 90 or 120 seconds and overrun adjustable 6, 10, 15 or 21 minutes
- Additional adjustable interval operation 8, 12 or 24 hours
- Includes comfort mode (for 2-3 speed operation): As soon as the fan is turned on, it starts operating at the lowest speed. After switching off, he runs at max. level für the pre-set time after (6, 10, 15, 21 minutes)
Overrun and presence detector T PIR version:
- Outlet üsung via Präsenz: As soon as a person enters the room and is in the sensor range, the fan switches on. When leaving the room, it turns off after the pre-set follow-up time of 0-20 minutes
Follow-up Pro and humidity sensor TP HCS version:
- With switch-on delay 0, 45, 90 or 120 seconds and overrun adjustable 6, 10, 15 or 21 minutes
- With humidity sensor: the fan is switched on when the relative humidity exceeds the preset limit (60%, 70%, 80%, 90%) überschreitet (factory setting 70%) and switches off when the relative humidity is 15% below the preset value or after 2 hours of continuous operation, if the humidity in the room can not be reduced
DIBt Certificate as PDF
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Delivery time 10 days
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Delivery in 2-3 days
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Delivery in 2-3 days
To order this product, please log in here.
Delivery time 10 days
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.
Delivery in 2-3 days
To order this product, please log in here.
Delivery in 2-3 days
To order this product, please log in here.
Delivery in 2-3 days
To order this product, please log in here.
Available from 19 December 2024
To order this product, please log in here.