Radial fan with direct drive C 35/4 T E - 400V/50Hz
Out of stock. No date known.
Pick your accessory
Order number:
30331
EAN: 8010300303314WEEE-Reg-Nr.: DE29217367
Product information: "Vortice Radial fan with direct drive C 35/4 T E - 400V/50Hz"
Direct drive radial fan, galvanized steel, hammer finish gray paint, 400 V~50 Hz, three-phase, 4-pole, intake Ø 170 mm, discharge flange 149 x 137 mm, max. 350 W, max. 1,550 m³/h, max. 334 Pa, max. 1,400 rpm, LP max. 61 dB(A) -3m, protection class IP55, protection class I, 1 step, temp. max. for continuous operation 50 °C, motor with ball bearings
| Air flow max (m³/h): | 1550 |
|---|---|
| Ansaug-Ø (mm): | 170 |
| Ausblasflansch (mm): | 149 x 137 |
| Colour: | hammered gray lacquered |
| Current consumption (A) 400 V: | 0.7 |
| Fan type: | Radial fan |
| Insulation class: | I |
| Material: | Galvanized steel |
| Motor: | ball bearing, three-phase |
| No. of poles: | 4 |
| No. of speeds: | 1 speed |
| Power max. (W): | 350 |
| Protection rating: | IP55 |
| Rev. max. (RPM): | 1400 |
| Sound pressure Lp -3m (dB(A)): | 61 |
| Specials RV: | with direct drive |
| Temp. max (°C): | + 50 |
| Total pressure Pmax (PA): | 334 |
| Voltage (V/Hz): | 400~50 |
| Air flow max (m³/h): | 1550 |
|---|---|
| Ansaug-Ø (mm): | 170 |
| Ausblasflansch (mm): | 149 x 137 |
| Colour: | hammered gray lacquered |
| Current consumption (A) 400 V: | 0.7 |
| Fan type: | Radial fan |
| Insulation class: | I |
| Material: | Galvanized steel |
| Motor: | ball bearing, three-phase |
| No. of poles: | 4 |
| No. of speeds: | 1 speed |
| Power max. (W): | 350 |
| Protection rating: | IP55 |
| Rev. max. (RPM): | 1400 |
| Sound pressure Lp -3m (dB(A)): | 61 |
| Specials RV: | with direct drive |
| Temp. max (°C): | + 50 |
| Total pressure Pmax (PA): | 334 |
| Voltage (V/Hz): | 400~50 |
Manufacturer:
Vortice S.p.A.
Strada Cerca, 2
Frazione di Zoate
I-20067 Tribiano (Mailand)
E-Mail: export@vortice-italy.com
Internet: https://www.vortice.com
This product requires a three-phase alternating current source (power source) for proper operation and is not equipped with a normal mains plug.
The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.
The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.
Accessories
