Radial fan with direct drive C 46/4 T E - 400V/50Hz
Out of stock. No date known.
Pick your accessory
Order number:
30337
EAN: 8010300303376WEE-Reg-Nr.: DE29217367
Product information: "Vortice Radial fan with direct drive C 46/4 T E - 400V/50Hz"
Direct drive radial fan, galvanized steel, hammer finish gray paint, 400 V~50 Hz, three-phase, 4-pole, intake Ø 288 mm, discharge flange 236 x 277 mm, max. 3400 W, max. 5.5 A, max. 6,650 m³/h, max. 814 Pa, max. 1,400 rpm, LP max. 76.5 dB(A) -3m, protection class IP55, protection class I, 1 step, temp. max. for continuous operation 30 °C, motor ball-bearing
| Air flow max (m³/h): | 6650 |
|---|---|
| Ansaug-Ø (mm): | 288 |
| Ausblasflansch (mm): | 236 x 277 |
| Colour: | hammered gray lacquered |
| Current consumption (A) 400 V: | 5.5 |
| Fan type: | Radial fan |
| Insulation class: | I |
| Material: | Galvanized steel |
| Motor: | ball bearing, three-phase |
| No. of poles: | 4 |
| No. of speeds: | 1 speed |
| Power max. (W): | 3400 |
| Protection rating: | IP55 |
| Rev. max. (RPM): | 1400 |
| Sound pressure Lp -3m (dB(A)): | 76.5 |
| Specials RV: | with direct drive |
| Temp. max (°C): | + 50 |
| Total pressure Pmax (PA): | 814 |
| Voltage (V/Hz): | 400~50 |
| Air flow max (m³/h): | 6650 |
|---|---|
| Ansaug-Ø (mm): | 288 |
| Ausblasflansch (mm): | 236 x 277 |
| Colour: | hammered gray lacquered |
| Current consumption (A) 400 V: | 5.5 |
| Fan type: | Radial fan |
| Insulation class: | I |
| Material: | Galvanized steel |
| Motor: | ball bearing, three-phase |
| No. of poles: | 4 |
| No. of speeds: | 1 speed |
| Power max. (W): | 3400 |
| Protection rating: | IP55 |
| Rev. max. (RPM): | 1400 |
| Sound pressure Lp -3m (dB(A)): | 76.5 |
| Specials RV: | with direct drive |
| Temp. max (°C): | + 50 |
| Total pressure Pmax (PA): | 814 |
| Voltage (V/Hz): | 400~50 |
Manufacturer:
Vortice S.p.A.
Strada Cerca, 2
Frazione di Zoate
I-20067 Tribiano (Mailand)
E-Mail: export@vortice-italy.com
Internet: https://www.vortice.com
This product requires a three-phase alternating current source (power source) for proper operation and is not equipped with a normal mains plug.
The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.
The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.
Accessories
C 46 air intake port protective grille
Order number: 22808
To order this product, please log in here.