Product information: "Vortice Radial fan with direct drive C 15/2 T - 400V/50Hz"

Direct drive radial fan, galvanized steel, hammer finish gray paint, 230/400 V~50 Hz, three-phase, 2-pole, intake Ø 108 mm, discharge flange 83 x 88 mm, max. 160 W, max. 0.5/0.3 A, max. 430 m³/h, max. 422 Pa, max. 2,800 rpm, LP max. 59.9 dB(A) -3m, protection class IP55, protection class I, 1 step, temp. max. for continuous operation 50 °C, motor ball bearing

Air flow max (m³/h):	430
Ansaug-Ø (mm):	108
Ausblasflansch (mm):	83 x 88
Colour:	hammered gray lacquered
Current consumption (A) 230 V:	0.5
Current consumption (A) 400 V:	0.3
Fan type:	Radial fan
Insulation class:	I
Material:	Galvanized steel
Motor:	ball bearing, three-phase
No. of poles:	2
No. of speeds:	1 speed
Protection rating:	IP55
Rev. max. (RPM):	2800
Sound pressure Lp -3m (dB(A)):	59.9
Specials RV:	with direct drive
Temp. max (°C):	+ 50
Total pressure Pmax (PA):	422
Voltage (V/Hz):	230~50

Air flow max (m³/h):	430
Ansaug-Ø (mm):	108
Ausblasflansch (mm):	83 x 88
Colour:	hammered gray lacquered
Current consumption (A) 230 V:	0.5
Current consumption (A) 400 V:	0.3
Fan type:	Radial fan
Insulation class:	I
Material:	Galvanized steel
Motor:	ball bearing, three-phase
No. of poles:	2
No. of speeds:	1 speed
Protection rating:	IP55
Rev. max. (RPM):	2800
Sound pressure Lp -3m (dB(A)):	59.9
Specials RV:	with direct drive
Temp. max (°C):	+ 50
Total pressure Pmax (PA):	422
Voltage (V/Hz):	230~50

Manufacturer:
Vortice S.p.A.
Strada Cerca, 2
Frazione di Zoate
I-20067 Tribiano (Mailand)
E-Mail: export@vortice-italy.com
Internet: https://www.vortice.com

Abmessungen C Serie

Title	File name	File Size	Type	Date	Download
C Series Instruction Manual	BA-C-Serie-70_EN_30302_Libretti_Istruzioni_5571084915__11-06-2021_171850	8633kb	pdf	2024-11-15 08:31
C Serie Datenblatt	C-Serie-Deutsch	1036kb	pdf	2024-11-06 15:47

This product requires a three-phase alternating current source (power source) for proper operation and is not equipped with a normal mains plug.

The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.