Axial wall fan A-E 30/4 T - 400V/50Hz
Available from 30 January 2026
Pick your accessory
Order number:
42227
EAN: 8010300422275WEEE-Reg-Nr.: DE29217367
Product information: "Vortice Axial wall fan A-E 30/4 T - 400V/50Hz"
Axial wall fan, steel, hammerblow gray painted, Ø 316 mm, 400 V~50 Hz, three-phase, 4-pole, max. 79 W, max. 1,696 m³/h, max. 0.22 A, max. 129 Pa, max. 1,400 rpm, LP max. 46 dB(A) -3m, protection class IP54, protection class I, max. temp. -30 - + 50 °C, motor ball bearing, speed adjustable
| Colour: | hammered gray lacquered |
|---|---|
| Current consumption (A) 400 V: | 0.22 |
| Delivery rate (m³/h): | 1696 |
| Fan type: | Axial fan, Wall fan |
| Insulation class: | I |
| Material: | Galvanized steel |
| Motor: | 1 speed, ball bearing, insulation class F, speed adjustable, three-phase |
| NW (mm): | 300 |
| No. of poles: | 4 |
| Power (W): | 79 |
| Protection rating: | IP54 |
| Rev. max. (RPM): | 1400 |
| Sound pressure Lp -3m (dB(A)): | 46.0 |
| Temp. max (°C): | -30 - + 50 |
| Total pressure Pmax (PA): | 129 |
| Voltage (V/Hz): | 380-415/~50 |
| Weight (kg): | 3,4 |
| Colour: | hammered gray lacquered |
|---|---|
| Current consumption (A) 400 V: | 0.22 |
| Delivery rate (m³/h): | 1696 |
| Fan type: | Axial fan, Wall fan |
| Insulation class: | I |
| Material: | Galvanized steel |
| Motor: | 1 speed, ball bearing, insulation class F, speed adjustable, three-phase |
| NW (mm): | 300 |
| No. of poles: | 4 |
| Power (W): | 79 |
| Protection rating: | IP54 |
| Rev. max. (RPM): | 1400 |
| Sound pressure Lp -3m (dB(A)): | 46.0 |
| Temp. max (°C): | -30 - + 50 |
| Total pressure Pmax (PA): | 129 |
| Voltage (V/Hz): | 380-415/~50 |
| Weight (kg): | 3,4 |
Manufacturer:
Vortice S.p.A.
Strada Cerca, 2
Frazione di Zoate
I-20067 Tribiano (Mailand)
E-Mail: export@vortice-italy.com
Internet: https://www.vortice.com
This product requires a three-phase alternating current source (power source) for proper operation and is not equipped with a normal mains plug.
The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.
The installation of non-plug-in appliances must be carried out by the respective network operator or by a registered specialist company, which will also assist you in obtaining the approval of the respective network operator for the installation of the appliance.
Accessories
Step transformer
ETID 1,5
Order number: 893025
5-step-transformer, 400 V, 50/60 Hz, max. 1,5 A, IP54, surface-mounted version, colour light grey, dimensions: B 300 x H 325 x T 185 mm
Ventilation grille
LGK-Vent 30
Order number: 91031
Ventilation grille, white, plastic, for inside and outside, NW 300, 347 x 347 x 13 mm
Wall sleeve
TWRH 330
Order number: 922262
suitable for E (ATEX) 30, MP 30, EQ (ATEX, MD, HD, ECO) 30, A-E 30; max. length 470 mm, inner diameter 330 mm, galvanized sheet steel, 10mm board
Schutzgitter
TRA 300
Order number: 51250
Schutzgitter zur Außenmontage nach DIN 13857, NW 300, A: 330 mm, B: 355 mm, C: 8 mm, D: 10 mm
