Available from 21 February 2026
WEEE-Reg-Nr.: DE29217367
Vortice CA 250 MD E W, wall-mounted centrifugal fan, NW 250 mm, with wall mounting plate, made of phosphated steel with polyester powder coating, hammer finish grey, 220-240 V~50/60 Hz, 125 W, max. 0.55 A, max. 1,030 m³/h, max. 548.3 Pa, max. 2,675 rpm, LP max. 50.8 dB(A) -3m, protection class IP44, protection class II, max. temp. for continuous operation 50° C, external rotor motor with ball bearings, 3-speed, speed adjustable, with thermal overload protection
| Colour: | hammered gray lacquered |
|---|---|
| Current consumption (A) 230 V: | 0.55 |
| Delivery rate (m³/h): | 1030 |
| Fan type: | Duct fan, Radial fan, Wall fan |
| Insulation class: | II |
| Material: | phosphated steel with polyester powder coating |
| Motor: | 3 speeds, ball bearing external rotor motor, speed adjustable, thermal overload protection |
| NW (mm): | 250 |
| Power (W): | 125 |
| Protection rating: | IP44 |
| Rev. max. (RPM): | 2675 |
| Sound pressure Lp -3m (dB(A)): | 50.8 |
| Temp. max (°C): | + 50 |
| Total pressure Pmax (PA): | 548,3 |
| Voltage (V/Hz): | 220-240/~50/60 |
| Colour: | hammered gray lacquered |
|---|---|
| Current consumption (A) 230 V: | 0.55 |
| Delivery rate (m³/h): | 1030 |
| Fan type: | Duct fan, Radial fan, Wall fan |
| Insulation class: | II |
| Material: | phosphated steel with polyester powder coating |
| Motor: | 3 speeds, ball bearing external rotor motor, speed adjustable, thermal overload protection |
| NW (mm): | 250 |
| Power (W): | 125 |
| Protection rating: | IP44 |
| Rev. max. (RPM): | 2675 |
| Sound pressure Lp -3m (dB(A)): | 50.8 |
| Temp. max (°C): | + 50 |
| Total pressure Pmax (PA): | 548,3 |
| Voltage (V/Hz): | 220-240/~50/60 |
Manufacturer:
Vortice S.p.A.
Strada Cerca, 2
Frazione di Zoate
I-20067 Tribiano (Mailand)
E-Mail: export@vortice-italy.comÂ
Internet: https://www.vortice.comÂ

